ZH-600T Drilling and Tapping Center

1. X/Y/Z Travel: 600 / 400 / 300 mm

2. Spindle Speed： 20,000 rpm (Direct-Drive BT30)

3. Rapid Traverse Rate： 48 / 48 / 48 m/min

4. CNC Controller： MITSUBISHI M80VB

Category	Details
Applicable Materials	Aluminum Alloys, Copper Alloys, Carbon Steel, Low-Carbon Alloy Steel
Workpiece Capacity	Max. 600 × 400 × 300 mm
Target Industries	Automotive, Precision Molds, General Machinery, Automation
Ideal For	High-Efficiency Batch Production

Parameter / Model		Unit	ZH-600T
Worktable area		mm	700*420
Number and size of T-slots on the worktable		mm	3-14*125
Stroke	X	mm	600
	Y	mm	400
	Z	mm	300
Maximum table load		kg	250
Distance from spindle nose to worktable		mm	150-450
Distance from spindle center to column rail surface		mm	420
Spindle taper hole		#	BT-30
Spindle motor power		kw	5.5
Maximum spindle speed		r/min	15000/20000
Rapid traverse	X	m/min	48
	Y	m/min	48
	Z	m/min	48
Three-axis motor power(X/Y/Z)		kw	1.5/1.5/3.0
Cutting speed		mm/min	1-10000
Positioning accuracy/300		mm	±0.005
Repeatability/300		mm	±0.003
Overall weight (approximate)		kg	4000
Overall dimensions (length × width × height)		mm	185026502650

Parameter / Model		Unit	ZH-600T	ZH-700T	ZH-800T	ZH-1000T
Worktable area		mm	700*420	800*420	1000*500	1000*500
Number and size of T-slots on the worktable		mm	3-14*125	3-14*125	5-18*100	5-18*100
Stroke	X	mm	600	700	800	1000
	Y	mm	400	400	500	500
	Z	mm	300	300	320	320
Maximum table load		kg	250	250	400	400
Distance from spindle nose to worktable		mm	150-450	150-450	150-470	150-470
Distance from spindle center to column rail surface		mm	420	420	550	550
Spindle taper hole		#	BT-30	BT-30	BT-30	BT-30
Spindle motor power		kw	5.5	5.5	5.5	5.5
Maximum spindle speed		r/min	15000/20000	15000/20000	15000/20000	15000/20000
Rapid traverse	X	m/min	48	48	48	48
	Y	m/min	48	48	48	48
	Z	m/min	48	48	48	48
Three-axis motor power(X/Y/Z)		kw	1.5/1.5/3.0	1.5/1.5/3.0	1.5/1.5/3.0	1.5/1.5/3.0
Cutting speed		mm/min	1-10000	1-10000	1-10000	1-10000
Positioning accuracy/300		mm	±0.005	±0.005	±0.005	±0.005
Repeatability/300		mm	±0.003	±0.003	±0.003	±0.003
Overall weight (approximate)		kg	4000	4100	4500	4600
Overall dimensions (length × width × height)		mm	185026502650	195024002460	276024002800	276024002800

Item	Details
Positioning Accuracy	±0.005mm
Repeatability	±0.003mm
Inspection Equipment	Laser Interferometer (for verification of positioning accuracy and repeatability)
Trial Cutting Protocol	Upon completion of assembly and commissioning at the Supplier's facility, the Buyer may conduct Pre-acceptance Trial Cutting on-site. Following delivery, installation, and commissioning at the Buyer's facility, Final Acceptance Trial Cutting shall be performed. The warranty period shall officially commence upon mutual signature and confirmation of successful acceptance.

ZH-600T Standard Specifications

Item	Details
CNC Controller	MITSUBISHI M80VB
Spindle	BT30（Direct-Drive）
Spindle Speed	Max.20000rpm（Optional:15000rpm）
Spindle Motor Power	5.5kw
Tool Magazine	21-Tool Arm-Type Magazine（BT30）
4^th Axis	4th Axis Interface Standard (Optional: Indexer / Rotary Table)
Probe System	Optional: Renishaw / Marposs Probe (for automatic alignment & in-process measurement)
Chip Conveyor	Chain-Type Chip Conveyor + Chip Cart
Coolant System	Spindle Center Through-Coolant (CTS, Optional) / Flood Coolant / Coolant Tank

Case 1	Details
Typical Workpiece	Automotive Aluminum Valve Body Material: ADC12 Aluminum Alloy Dimensions: 350 × 250 × 120 mm
Customer Challenge	1. Excessive cycle time (~15 min/piece). 2. Frequent tool changes causing significant downtime. 3. Unstable surface finish requiring rework for some batches.
Solution	ZH-600T Drilling & Tapping Center • 20,000 rpm Direct-Drive Spindle & 21-Tool Arm-Type Magazine (Tool change time: 1.8s). • 48 m/min Rapid Traverse to minimize non-cutting time. • ±0.005mm Positioning Accuracy ensuring batch consistency.
Results	• Cycle Time:Reduced to < 8 min (Efficiency increased by 46%). • Downtime:Tool change wait time reduced by 70%. • Quality:Surface roughness stabilized at Ra 1.6; Yield rate increased from 92% to 98.5%.

Case 2	Details
Typical Workpiece	3C Electronics Aluminum Mid-frame Material: 6063 Aluminum Alloy Dimensions: 280 × 160 × 12 mm
Customer Challenge	1. Complex process (drilling, tapping, side milling). 2. Insufficient rigidity caused chatter marks on thin-walled parts. 3. Production bottleneck limiting order fulfillment.
Solution	ZH-600T Drilling & Tapping Center • 600×400×300mm Travel optimized for medium-sized batch production. • High Axis Power (1.5/1.5/3.0 kW) providing robust cutting force. • 4th Axis Capability for multi-face machining in a single setup.
Results	• Process Consolidation: Completed all drilling, tapping, and side milling in one setup (eliminating re-clamping errors). • Quality: Chatter marks completely eliminated. • Productivity: Daily output increased from 180 to 320 pcs (+77% Capacity Boost).

Commercial Terms & Conditions

Item	Details
Delivery Time	Approximately 45-60 working days upon receipt of down payment and signed contract (subject to the final agreement).
Packaging	Standard Export Wooden Case with moisture-proof, shock-proof, and rust-proof treatment, suitable for long-distance ocean freight.
Shipping	Domestic: Truck delivery to the port. Export: Available via sea or air freight (FOB/CIF terms accepted). Costs are calculated separately.
Installation	The Supplier shall dispatch engineers for on-site installation and commissioning. The Buyer is responsible for providing the foundation, power supply, and lifting assistance.
Training	Free On-site Training (2-3 days) provided by Supplier's engineers, covering: Machine operation, Basic programming, Daily maintenance, and Troubleshooting.
Warranty	12-month warranty starting from the date of Final Acceptance (excluding consumables and human-induced damage). Free repair or parts replacement for quality-related issues during the warranty period.
Spare Parts	Standard Tool Kit included (seals, fuses, filters, etc.). Long-term supply of genuine spare parts at competitive prices available upon request.